APT M160 60lb Breaker
Bore Diameter (inches) 2-1/4"
Stroke (inches) 4-1/8"
Blows per Minute 1680
CFM @ 90 psi 60 - 65
Weight (lbs) 68
Length (inches) 25-3/4"
Air Inlet Size 1/2" MALE NPT

Sullair MPB-90A 90lb Breaker
Weight 92 lbs.
Length 27 1/2"
Bore & Stroke 2 7/16" x 5 9/32"
Impact Rate 1380 blows/min.
Air Consumption 62 cfm (1.8 m3/min, 29 l/s)
Air Inlet Diameter 3/4" NPT
Shipping Weight 97 lbs.
Chuck Size 1 1/8" HX x 6", 1 1/4" HX x 6"

APT M650 Chipping Hammer
Bore Diameter (inches) 1-1/8"
Stroke (inches) 4"
Blows per Minute 1375
CFM @ 90 psi 34 - 36
Weight (lbs) 16
Length (inches) 16"
Air Inlet Size 1/2" NPT FEMALE

Ingersoll Rand 281 1"Impact Driver
Working Torque: 100-100 ft-lbs
Max Torque: 1450 ft-lbs
Blows/Minute: 750
Free Speed: 5000rpm
Standard Bolt Capacity: 1-1/4"
Weight: 25.2 lbs
Length: 20.1"
Avg Air Consumption: 10cfm; 37cfm@load
Air Inlet Size: 1/2"
Min Hose Size: 1/2"

Chicago Pneumatic CP77 Hammer
Square Drive [in.] 3/4
Working Torque Range [Nm (ft.lbs)] 203-949 (150-700)
Max. Torque@90PSI Rev. [Nm (ft.lbs)] 1356 (1,000)
Free Speed [rpm] 4,200
Weight [kg (lb)] 4.76 (10.5)
Length [mm (in.)] 245 (9.6)
Avg. Air Consumption [l/min. (CFM)] 170 (6)
Air Inlet Thread Size NPTF [in.] 3/8
Sound dB(A) Pressure 96
Vibration m/s2 4.9

DeWalt DW66C-1 Coil Siding/Fence Nailer

Fastener Length: 1-1/4" To 2-1/2
Magazine Capacity: 300
Fastener Diameter Range: .080 To .092
Fastener Type/Guage: 15 Degree Coil Siding
Magazine Capacity: 300
Operating Pressure: 70 - 120
Depth Adjustment: Tool Free
Exhaust: Adjustable
Weight: 4.9

Hitachi NV 45 Roofing Nailer
7/8-inch to 1-3/4-inch roofing nailer;
120-nail capacity
Tool-free depth of drive adjustors; side-load magazine Steel and rubber body protectors; carbide-tipped push level; rubber safety valve 9-27/32 by 4-5/8 by 10-3/8 inches; 5.5 pounds
2 Available

Texas Pneumatic Hose Whips
Lubricator TX-0L
Hose Length-Size-Type 6' - 1/2" ID, 300 psi
6 Available